Frequently Asked Questions

For horizontal worktops and counters, a supporting substrate such as MDF is generally recommended beneath the 12mm sheet for strength, especially on wider spans. However, for vertical cladding or low-impact areas, it can be installed without a substrate depending on design and fixing methods.

Yes. Its warm neutral undertone pairs well with beige, taupe, natural oak, brushed brass, or soft grey finishes. It’s especially popular in transitional schemes where both contemporary and classic elements are combined.

When heated to the correct temperature, BL-302 can be thermoformed to a minimum internal radius of approximately 25mm. This allows for tight curves and smooth, organic shapes — perfect for contemporary furniture or curved countertops. Always check with your fabricator for project-specific recommendations.

While BL-302 has a soft tone, it is not specifically designed for backlighting. If you’re aiming for a translucent effect or glowing features, other Hanex decors (such as from the Lucent or Opal ranges) may be better suited. However, subtle lighting effects can still be achieved with creative edge treatments or routed features.

Yes, BL-302 offers pattern consistency across all sheets thanks to its engineered composition. Unlike natural stone, which can vary dramatically in tone and veining, Linen White is manufactured for uniformity—ideal for large-scale or multi-room installations where visual consistency matters.

Unlike natural stone, Cascade Pure Grey is engineered for controlled variation. The wave-like veining is intentionally repeatable, so when installing multiple sheets, you can expect uniform, flowing patterns with consistent look and feel across adjacent joins.

In large open areas, the gentle, low-contrast veining reads as subtle texture and imparts a sense of calm. In smaller rooms, the same tonal variation adds depth without feeling busy, making it an ideal choice for kitchens, bathrooms, or feature walls where you want soft movement without overwhelming.

While Cascade is UV-stable for typical indoor conditions, it’s not recommended for exterior use, especially where direct sunlight or weather exposure is present. Its long-term performance is optimised for interior environments.

Yes. Its gentle veining hides daily wear well, and its composite nature makes it durable, hygienic, and refurbishable. It’s well-suited to applications like check-in desks, vanity units, and cafe counters.

Its soft grey base makes it extremely versatile. It complements natural woods like oak or walnut, matte black metal accents, and even brass or pewter hardware. It’s a favorite in schemes combining Scandinavian minimalism with contemporary warmth.

Installation time depends on the size and complexity of the project. Most commercial worktops are templated and manufactured off-site to minimise disruption, ensuring a smooth and efficient on-site fit. The team typically provides clear timelines during consultation so businesses can plan around any required downtime.

Yes. Hanex is engineered to withstand consistent use, impact, and heat exposure commonly found in commercial spaces. Its robust composition ensures it retains its appearance even in demanding environments such as bars, reception desks, kitchens, and healthcare facilities.

Hanex surfaces are low-maintenance and easy to clean. Because they are non-porous, they do not harbour bacteria and require only simple daily cleaning with mild detergent. Scratches or marks can be repaired on-site, which helps extend the lifespan of the surface and reduces maintenance downtime.

Yes. Hanex can be fabricated to match bespoke specifications, including custom shapes, seamless joins, integrated sinks, curved edges, and branded design elements. This flexibility allows designers and architects to create tailored worktops and installations that fit precise project requirements.

Hanex Solid Surface is non-porous, highly durable, and resistant to stains, moisture, and daily wear. These qualities make it ideal for high-traffic commercial settings such as retail counters, hospitality spaces, healthcare facilities, and office environments. It also meets hygiene and safety standards required in professional spaces.

Cotton Concrete pairs perfectly with industrial, Scandi, Japandi, and contemporary minimalist interiors. The soft concrete texture adds character without overpowering, making it a smart choice for those who want a raw material look with a softer edge. It also contrasts beautifully with timber, black metal, and matt finishes.

Yes. Cotton Concrete can be CNC routed for engraved branding, signage, or textural design features. It maintains structural integrity when routed and can be backfilled with resin or lighting for visual contrast. Always consult your fabricator to ensure clean, consistent results across the panel.

A standard 12mm Hanex sheet weighs approximately 16.2 kg/m², which is lighter than natural stone or quartz. For worktops or horizontal spans over 600mm, support (such as MDF substrate) is recommended, but vertical panels or splashbacks can often be installed without extra reinforcement.

CT-004 offers good UV resistance for indoor use, meaning it can be installed near natural light sources like skylights, windows, or glazed doors without significant yellowing or fading. However, it is not suitable for prolonged direct outdoor exposure.

Yes. It is compatible with both integrated Hanex sinks and undermounted stainless steel bowls. The joins can be made seamless with colour-matched adhesive, providing a sleek, easy-to-clean transition between sink and surface.

The internal bowl measures approximately 192 × 302 × 130 mm, while the overall sink size is 212 × 322 × 140 mm. This balance of compact size and depth ensures excellent usability without overwhelming small kitchens

Use an installation template for precise cutout, then drop the sink in upside-down. Apply a silicone bead around the cutout’s edge and secure with clamps spaced about 3 in apart on all sides. Tighten gently to avoid distorting the countertop. Finally, wipe away excess sealant and let cure per manufacturer’s instructions

The seamless, flush-mounted design and high-grade micron-gloss finish eliminates ledges or crevices where bacteria can accumulate—combined with non-porous steel surfaces, this makes it a top choice for domestic kitchens, medical settings, and food prep zones.

Absolutely. As part of the Edge series, it’s engineered for invisible joins with Hanex or similar solid surfaces. Color-matched sealants and precision mitred edges ensure a monolithic finish that blends seamlessly into the countertop

Yes. The ECLS190-300 is also available in Charcoal and Gold finishes, giving you flexibility to match contemporary colour schemes or luxury kitchen aesthetics

Hanex Solid Surface sheets are typically manufactured in 12mm thickness as standard. This offers the ideal balance between strength, flexibility, and ease of fabrication—especially for seamless joins and thermoforming. Other thicknesses, such as 6mm are available for specialist applications or vertical surfaces, but 12mm is the most commonly specified for worktops, counters, and integrated installations.

No. Hanex is inherently non-porous, so it doesn’t require sealing or resealing—unlike granite or marble.

Hanex is a global solid surface brand manufactured by Hyundai L&C. At Hanex UK we are the distributor of Hanex working with fabricators, architects and interior designers. Learn more about Hanex here.

Hanex Solid Surfaces are available to buy through our local quality network, trusted solid surface installers. Find an installer near you here.

Hanex is an acrylic surface that’s non-porous, solid and flexible with a seamless appearance making it a popular alternative to Corian, Diore, Ecotops and HiMacs. The luxury, versatile and hygienic features of Hanex makes them a fantastic choice for kitchens, bathrooms, veterinary surgeries and other various applications. 

As well as being durable and easy to clean, Hanex solid surface materials are available in a wide variety of colours, thicknesses, textures and styles offering endless design opportunities.

We do not recommend cutting your Hanex solid surface. It is best to have your solid surface cut and shaped professionally by one of our Hanex solid surface installers before having it installed.

Hanex is an acrylic solid surface material composed of Aluminium TriHydroxide, Methyl Methacrylate, Acrylic Monomer Polymethyl and natural pigments for aesthetics and colour variations. Learn more about what Hanex is made of here.

Hyundai L&C manufactures Hanex which is a comprehensive decorative building materials company, one of the largest building material manufacturers. Hyundai L&C manufactures products based upon the market’s demand whilst providing global consumers with building materials such as Hanex solid surfaces to a high standard. 

It’s durable, but not scratch-proof. Always use a chopping board to protect the surface. If scratches occur, they can often be sanded out or refinished.

No. Hanex is heat-resistant up to around 100 °C (212 °F), but direct contact with hot cookware or heat-generating appliances can cause discolouration or cracking. Always use a trivet or heat pad.

Because the KS8 is fully cast in 12 mm thick Hanex, the recommended installation method is top-mount or flush-mount into a solid substrate like 18 mm plywood or MDF. For undermount use, ensure proper brace support especially under the front lip to prevent flex over time.

Yes. The non-porous Hanex material is NSF 51 certified, making it resistant to bacteria, mould, and mildew—ideal for sanitary food preparation in both home and commercial kitchens

Yes. The KS8 is compatible with standard under-sink plumbing including dishwashers. To maintain access, leave enough clearance in the cabinet and use a well-sealed waste trap to prevent leaks into the solid surface material.

The KS8 features a spacious rectangular bowl approximately 450 mm × 350 mm × 200 mm deep, offering around 31 litres of usability—generously accommodating large baking trays, pots, and pans ideal for kitchen tasks.

Avoid harsh chemicals such as oven cleaners, paint removers, drain cleaners, or acetone. If any of these come into contact with the surface, rinse immediately with water to prevent damage or discolouration.

While solid surface countertops are durable and long-lasting, it is possible to scratch them if not cared for properly. Discover our guide with professional advice on how to care for your solid surface countertop here.

Non-abrasive, ammonia-based cleaners or regular household countertop cleaners are safe to use on your solid surface countertop. 

Unlike other surfacing materials, Hanex solid surfaces are nonporous and feature full-dimensional colouring. This allows Hanex to be easily polished, removing any surface damage such as scratches, and allowing you to restore the surface to its original condition. Discover our professional advice on how to polish solid surface countertops here.

To maintain your kitchen worktop correctly and to ensure it stays looking brand new we would recommend using an ammonia-based cleaner (avoid window cleaner) or warm soapy water. Discover more tips on how to make your worktops shine here.

To make your worktops shine we would recommend wiping down the surface with warm, soapy water or a non-abrasive, ammonia-based cleaner or even regular household countertop cleaners. Discover more tips on how to make your worktops shine here.

Hanex solid surfaces are easy to clean and only require to be wiped down with a microfibre cloth with soapy, warm water or non-abrasive, ammonia-based cleaners. Discover our professional advice on how to care for your Hanex worktops here. 

Installation begins with an accurate site survey and templating, followed by off-site fabrication of the worktops or surfaces. Once ready, the pieces are delivered and installed on-site with minimal disruption. Installation time varies based on project size, but the process is designed to be efficient, allowing businesses to plan around minimal downtime and return to full operational use quickly.

Maintenance is straightforward. Hanex’s non-porous surface means it resists staining and bacterial growth, requiring only mild detergent and warm water for daily cleaning. In the case of minor scratches or marks, surfaces can often be lightly sanded and refinished, helping preserve a clean and professional appearance.

Yes. Hanex is engineered to withstand daily wear and tear common in high-traffic areas such as communal kitchens, staff rooms, reception desks and washrooms. Its robust build ensures long-term durability, reducing the need for frequent replacements or repairs and delivering good value over time.

Yes. Hanex can be fabricated into bespoke shapes, integrated sinks, custom worktop edges, splashbacks, reception counters and communal work surfaces. This flexibility enables it to fit seamlessly into a wide range of office layouts and design styles, from minimalist workspaces to modern co-working interiors.

Hanex Solid Surface is durable, low-maintenance, hygienic, and well-suited for busy office spaces, breakout areas, kitchens, and washrooms. Its seamless surface resists stains, moisture, and bacterial build-up, ensuring a clean and professional finish even with frequent use.

Hanex Solid Surface sheets are typically manufactured in 12mm thickness as standard. This offers the ideal balance between strength, flexibility, and ease of fabrication—especially for seamless joins and thermoforming. Other thicknesses, such as 6mm are available for specialist applications or vertical surfaces, but 12mm is the most commonly specified for worktops, counters, and integrated installations.

No. Hanex is inherently non-porous, so it doesn’t require sealing or resealing—unlike granite or marble.

Hanex inhibits the growth of bacteria thanks to its non-porous, seamless finish. While it doesn’t contain active antimicrobial agents, it’s easy to clean and doesn’t harbour germs.

It’s durable, but not scratch-proof. Always use a chopping board to protect the surface. If scratches occur, they can often be sanded out or refinished.

No. Hanex is heat-resistant up to around 100 °C (212 °F), but direct contact with hot cookware or heat-generating appliances can cause discolouration or cracking. Always use a trivet or heat pad.

Avoid harsh chemicals such as oven cleaners, paint removers, drain cleaners, or acetone. If any of these come into contact with the surface, rinse immediately with water to prevent damage or discolouration.

While solid surface countertops are durable and long-lasting, it is possible to scratch them if not cared for properly. Discover our guide with professional advice on how to care for your solid surface countertop here.

Non-abrasive, ammonia-based cleaners or regular household countertop cleaners are safe to use on your solid surface countertop. 

Hanex is an acrylic solid surface material composed of Aluminium TriHydroxide, Methyl Methacrylate, Acrylic Monomer Polymethyl and natural pigments for aesthetics and colour variations. Learn more about what Hanex is made of here.

D-Terrazzo offers the aesthetic of terrazzo—multi-tonal specks and a warm, earthy base—without the porosity or maintenance demands of real cement-based terrazzo. It’s uniform in colour and finish, repairable, and seamless in installation, making it a more practical choice for hygiene-sensitive and high-traffic spaces.

Hanex solid surfaces, including D‑Terrazzo, exhibit a tensile strength of ~3,850 psi (ASTM D‑638), a flexural strength of ~5,800 psi (ASTM D‑790), and IZOD impact resistance of ~0.28 ft·lb/inch. These values confirm its robustness under structural and repeated-use conditions.

D‑Terrazzo is rated Euroclass B‑s1, d0 (low flame spread, limited smoke, no droplets)—suitable for commercial spaces. Additionally, it is low-VOC, silica-free, and radon-safe as per Hanex sustainability documentation.

Given its thermal expansion data, installers should incorporate 3–5 mm clearance gaps at perimeter and expansion joints, especially over spans +3 m to accommodate movement and avoid stress.

Hanex two-component adhesive:

• Workability: 8–12 minutes, full cure in 12 hours at 22 °C
• Finished adhesive matches tensile (3,850 psi) and flexural (5,800 psi) performance of the sheet
• UV-stable, pigment-compatible, sandable, non-yellowing—designed for invisible seams

Installation time varies depending on the size and complexity of your project. Once templating is complete, fabrication is carried out off-site to ensure accuracy and reduce disruption. Most installations can be completed quickly and efficiently, with the team providing clear timelines so you can plan your home project with confidence.

Maintenance is simple. Hanex requires only mild detergent and warm water for daily cleaning. Its non-porous structure prevents stains from penetrating, and minor scratches can often be repaired with gentle sanding. This makes it a practical and low-maintenance option for busy households.

Yes. Hanex is highly versatile and can be fabricated to suit bespoke layouts, including curved edges, integrated sinks, waterfall ends, splashbacks, and custom shapes. This flexibility ensures an exact fit for your kitchen or bathroom, even in homes with unusual or complex layouts.

Hanex provides a seamless, repairable surface that many natural stones or laminates cannot offer. Unlike granite or quartz, Hanex can be refinished if scratched or marked, extending the lifespan of your worktop. Homeowners also benefit from a consistent colour and pattern throughout the material, creating a more uniform aesthetic.

Hanex Solid Surface is non-porous, hygienic, and highly durable, making it ideal for everyday use in kitchens and bathrooms. It resists stains, moisture, and bacteria, while offering seamless joins that create a smooth, modern finish. The combination of practicality and contemporary design makes it a reliable long-term choice for residential spaces.

N-White is one of Hanex’s purest whites, designed to offer a clean, neutral tone without noticeable undertones. Unlike some “warm whites” or “off-whites,” it is crisp and modern, making it ideal for high-contrast interiors or paired with stainless steel, monochrome cabinetry, and glass accents.

Yes. As a solid, uniform white, surface marks, light scratches, and daily wear may be more visible than on veined or textured designs. That said, Hanex’s matte finish and easy refinishing process make light maintenance simple — particularly in commercial or high-use kitchens.

Absolutely. N-White’s solid tone allows for virtually invisible joins when fabricated correctly. It’s often used in commercial interiors such as healthcare labs, clinics, and cleanrooms, where a seamless appearance and sterile impression are essential.

Yes. N-White is UV stable for typical indoor use and performs well as a vertical cladding or splashback material. When correctly fabricated and installed, it resists discolouration, even near sinks or under-cabinet lighting — though direct sunlight over long periods should be minimised.

Yes. N-White is frequently paired with integrated sinks and coved upstands, allowing for seamless transitions between worktop and wall — a popular choice in hygiene-focused or minimalist design schemes. This eliminates dirt traps and enhances easy cleaning.

Under natural daylight, Menta Green reads as a soft pastel mint, both fresh and subtle. Under warmer, artificial lighting it takes on slightly deeper, sage-like undertones, adding warmth and richness to kitchens, bathrooms, or feature walls.

Yes. S‑026 forms well at typical thermoforming temperatures (~160–180 °C). A professional fabricator can thermoform it into smooth waterfall islands, curved upstands, and rounded furniture edges, usually down to a minimum internal radius of 25 mm.

Yes. The non-porous nature of Hanex, including S‑026, ensures resistance to staining from pigments and oils. Prompt cleaning with mild detergent or diluted bleach (1:10) is all that’s needed to keep the surface stain-free.

Absolutely. It can be seamlessly paired with Hanex colour-matched integrated sinks, or undermounted stainless steel or ceramic bowls. The result is a clean, easy-to-maintain junction without visual interrupt—ideal for a minimalist, cohesive look.

Yes. Menta Green’s soft yet vibrant tone lends itself well to residential kitchens and bathrooms, as well as commercial settings like stadiums, cafés, wellness centres, and office breakout areas—especially when aiming for a calming, nature-inspired aesthetic.

Using recycled plastic saves raw material and energy, reduces landfill, and promotes circular design. Compared to virgin plastics or non-renewable surfacing, Smile Plastics offers sustainability benefits without compromising aesthetics or durability.

Yes — the sheets are made from 100 % recycled plastic and are themselves recyclable, closing a loop in the circular economy.

We collect from SMILE 1-2 times a week and will aim to deliver to you in 1-4 working days from order for items that are in stock. Contact us to find out the lead time for your requirement.

The panels are designed to be simple to maintain. Regular cleaning with mild detergent and non-abrasive cloths is generally sufficient. Avoid harsh abrasives, solvents, or strong acids. (You may provide a more detailed maintenance guideline on your site.)

Very widely. Typical applications include:

• Tables, tabletops, counters

• Seating elements

• Storage units, cabinetry

• Wall panelling and decorative surfaces

• Small product parts and design elements

• Washrooms and interior wet zones

• Exhibition, retail, and hospitality interiors

No — Smile Plastics sheets are made from chemically inert recycled plastics and have non-detectable levels of VOCs (Volatile Organic Compounds), as confirmed via independent testing.

There are different core materials depending on the range: for example, PET (100% recycled and recyclable) and HIPS are used in various ranges.

No — because each panel is made from recycled material, no two boards are exactly the same. Every sheet carries its own unique character in colour and pattern.

Panels measure 3000 × 1200 mm. The default thicknesses are 12 mm and 20 mm. Alba is also available in 5mm. Custom thicknesses and dimensions may be available via the Made-to-Order service.

Smile Plastics is a brand of recycled plastic sheets manufactured by Smile Materials. Each panel is made from 100 % recycled plastic and processed to provide durable, rigid, and waterproof surfaces. Hanex UK are a distributor of  SMILE Plastics along with Hanex Solid Surfaces

Hanex inhibits the growth of bacteria thanks to its non-porous, seamless finish. While it doesn’t contain active antimicrobial agents, it’s easy to clean and doesn’t harbour germs.

Yes. Its hygienic, seamless, and easy-to-clean surface makes Hanex suitable for healthcare, hospitality, food service, and other high-traffic environments.

Yes. Hanex is non-porous and resistant to mould, mildew, and bacteria, making it ideal for bathrooms, wet rooms, and shower walls. It can also be thermoformed into seamless shapes for a sleek, hygienic finish.

Starry Night has a deep, near-black base with reflective specks that catch and scatter light, producing a subtle shimmer under artificial or directional lighting. In natural daylight, the surface appears flatter and darker; under LEDs or pendant lights, the embedded particles mimic a starry sky—ideal for moody, luxurious interiors.

It’s a popular choice in both residential and commercial settings, but owners should be aware that scratches and wear may be more visible on dark, solid colours. That said, Hanex is fully repairable — surface marks can be buffed or sanded out, and it’s naturally non-porous and hygienic.

Yes — Starry Night can be thermoformed at standard processing temperatures (160–180 °C). The minimum internal radius achievable is approximately 25 mm, though darker colours may show stress lines more visibly if improperly formed. Pre-sanding the inner radius and gradual heating helps maintain finish integrity.

T-518 meets Hanex’s standard mechanical performance specs, including a flexural strength of ~5,800 psi and tensile strength of ~3,850 psi. Its dense pigmentation slightly reduces flexibility, so fabricators should use extra caution when handling curved or unsupported sections, especially around cutouts.

Yes. With proper fabrication, colour-matched adhesive creates virtually invisible seams, allowing Starry Night to be used for large-scale installations like island worktops, reception counters, or wall panels without visual interruption — ideal for minimalist or luxury aesthetics.

Maintenance is straightforward. Hanex’s non-porous surface means it resists staining and bacterial growth, requiring only mild detergent and warm water for daily cleaning. In the case of minor scratches or marks, surfaces can often be lightly sanded and refinished, helping preserve a clean and professional appearance.

The VB6 basin has an internal bowl measuring approximately 400 × 300 × 150 mm, based on standard Hanex sink proportions. This provides around 18 liters of capacity—ample for bathroom tasks like handwashing, shaving, or light washing.

VB6 is designed primarily for top-mount installation into a countertop with a 38 mm lip. It can be flush-mounted with precise templating, but requires a strong substrate (MDF or plywood) beneath for support and correct sealing with 100% silicone.

The basin surface is smooth and matte-satin, with a soft, warm touch. It reflects light evenly—avoiding glare—but gains a luxurious depth under diffused LED or natural daylight, making it feel high-end and inviting in modern bathrooms.

Yes. As a solid surface sink, VB6 dampens noise well—water flow and clatter are noticeably softer than in thinner, hollow sinks, enhancing the premium feel of the bathroom environment.

Yes—it’s fully non-porous and waterproof, so VB6 can be used in damp environments. However, ensure proper sealing around the perimeter with marine-grade silicone to prevent water ingress over time.